Industry News

Tapered bore bearing removal

Update:Jan 2018,08
Summary:

Remove the smaller bearing with adapter sleeve, support […]

Remove the smaller bearing with adapter sleeve, support the inner adapter with the stop fastened to the shaft, unscrew the nut, insert the spacer, and then hammer the bushing with a hammer. Pull the withdrawal sleeve operation. Use a lock nut to remove it. In case of difficult work, a number of bolt holes are provided on the circumference of the nut and the bush is pulled by screwing in the bolt.
Large bearings, the use of hydraulic disassembly easier. Oil pressure in the hole on the tapered shaft to send oil, so that the expansion of the inner ring, remove the bearing. Operation to prevent the bearing suddenly off, you can also use the hydraulic nut removal bushings.

http://www.gdbr-bearing.com/