Industry News

Bearing cleaning

Update:Dec 2017,27
Summary:

When servicing and disassembling the bearings, first re […]

When servicing and disassembling the bearings, first record the appearance of the bearings and check the remaining amount of lubricant. After sampling, clean the bearings. Cleaners commonly used gasoline, kerosene.
Remove the bearing cleaning, washing and finishing points in the container, put a metal mesh, the bearing does not directly contact with the container of dirt. Rough wash, if the bearing with dirt rotation, will damage the bearing rolling surface, it should be noted. In the rough wash oil, the use of a brush out of grease, stickies, basically clean, into the fine wash.
Fine wash, is the bearing in the cleaning oil while rotating, while carefully cleaned. In addition, the cleaning oil should be replaced frequently to keep it clean.

http://www.gdbr-bearing.com/